General Wire ER-A Easy Rooter Basic Unit with 75' x 3/4" Cable, 75' x 1/2" Cable in Small Cage, and COCS-R Combination Cutter Set
General Wire ER-A Easy Rooter Basic Unit with 75' x 3/4" Cable, 75' x 1/2" Cable in Small Cage, and COCS-R Combination Cutter Set The General Wire ER-A Easy Rooter Includes: Easy Rooter ER Basic Unit including Machine Frame, 1/3 HP Capacitor Motor, Large Cage, Ground Fault Interrupter, Air Foot Switch, Safety Slip clutch, Leather Gloves, How-To Video, 20' Power Cord, one 75' x 3/4" Cable, one 75" x 1/2" Cable in Small Cage; and COCS-R Combination Cutter Set. General Wire ER-A Easy Rooter Features: The Easy Rooter is a tough, easy-to-use machine. It has a rugged powder coated steel frame with roll bars to protect the motor and heavy-duty roller bearings in the cage for longer life and greater motor efficiency on long runs. The large zinc-plated cage holds 100' of 3/4" or 5/8" Flexicore cable, while optional smaller cage holds 100' of 1/2" cable. An extra-long plated folding handle quickly locks in place, making it much easier to wheel the Easy Rooter to the job, without sacrificing the compact size needed for easy loading in a car trunk. The Easy Rooter rolls smoothly on big 10" ball bearing wheels mounted on a half inch reinforced axle. Power is supplied by a 1/3 hp motor with capacitor start, thermal overload protection, and reverse switch. Standard safety features include an air-actuated foot pedal, ground fault circuit interrupter, and safety slip clutch. Wire Rope Center Construction: Heavy-gauge wire coiled tightly around 42-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility. General Wire ER-A Easy Rooter Basic Unit Specifications: • Weight: 80 lbs without cable. •.Large Cage: Zinc plated 100' of 3/4" capacity with heavy duty roller bearings. • Small Cage: Zinc plated 100' of 1/2" capacity with iolite bronze bushings. • Motor: 1/3 HP heavy duty, capacitor start, thermal overload protection, Forward/Off/Reverse Switch. • Safety Slip Clutch: Protects cable and operator. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 20', 3 wire, vinyl covered with molded plug. Equipped with ground fault circuit interrupter. • Wheels: 10" semi-pneumatic with roller bearings. • Cables: 3/4" for 4-10" lines; 5/8" for 3-6" lines; 1/2" for 2-3" lines and 4" lines without roots. • Cutter Set: Spear Head, 2" U-Cutter, 3" Heavy-Duty Side Cutter, 3" Heavy-duty Saw Blade, Large Retriever, Arrow Head, 1-1/2" U-Cutter and Small Retriever. • Leather Gloves: With reinforced palm for hand protection.
