General Wire PS91-E Speedrooter 91 with 5/8" x 100' Cable, 1/2 Horsepower
General Wire PS91-E Speedrooter 91 with 5/8" x 100' Cable, 1/2 Horsepower General Wire PS91-E Speedrooter 91 Includes: Speedrooter 91 with one 100ft. x 5/8" (30m x 15.8mm) cable and SRCS cutter set. General Wire PS91-E Speedrooter 91 Features: The Speedrooter has a reputation for being a machine that really can take a beating. Its frame is braced at key stress points, the drum is supported front and back for longer bearing wear, and General's unique Flexicore wire rope center cables are so tough they carry a one year limited warranty. To make the new Speedrooter 91 even more user friendly, we've redesigned the frame to make it easier for you to load onto a truck. As it's being loaded, the machine slides smoothly from the loading wheel to the handle to the stair climbers and finally to the wheels We've also given the Speedrooter 91 an adjustable height handle. It can be three inches longer or more compact, depending upon your preference. And the machine has a swivel motor mount that swings to the side for more clearance when switching drums. For those smaller lines, you can switch to a small drum that holds 100 feet of 1/2" cable, a job that takes less than a minute. Just loosen three knobs, swing the motor out of the way, and lift off the drum. The power cable feed drives 3/4", 5/8", and 1/2" cables and has the pulling power to get your cables out of the line, even on long, tough jobs. To adjust 3/4" or 5/8" cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. The large drum has a see-through inner cage, so you can quickly tell how much cable is left in the drum. General Wire PS91-E Speedrooter 91 with 5/8" x 100' Cable, 1/2 Horsepower Specifications: • Weight: 115 lbs. (52kg) without cable. • Dimensions: 26" deep; 22" wide; 41" high (66cm x 56cm x 104cm). • Large drum holds 100' x 3/4" cable. (30m x 19mm). • Optional small drum holds 100' x 1/2" cable (30m x 12.7mm). • Drum Removal: Loosen three knobs, tilt motor back, and lift off. • Motor: 1/2 hp with capacitor start, forward-off-reverse switch. 20' power cord and ground fault circuit interrupter. • Foot Switch: Pneumatic, with no electrical contact between pedal and motor. • Wheels: 10" semi-pneumatic with roller bearings. • Stair Climbers: Heavy duty V-belts running on nylon rollers. • Wheel Brake: Keeps machine in place after it has been positioned by drain opening. • Truck Loading Wheel: Enables one person to lift machine onto bed of truck. • Tool Box: Attached to rear of machine. • Leather Gloves: For hand protection when guiding cable. • Cables: Left-wound Flexicore wire rope center 3/4" diameter for 4" to 10" lines and 3" lines without sharp bends; 5/8" diameter for 3" to 6" lines; 1/2" diameter for 2" to 3" lines. • Cutter Set: 33" Flexible Leader, Spear Head, 2" U-Cutter, 3" Side Cutter Blades, 4" Side Cutter Blades, 3" Heavy Duty Saw Blade, 4" Rotary Saw Blades, and Large Retrieving Tool. * Additional charge for residential delivery
